Analysis Summary
Notes:
- 1) No attempt has been made to eliminate the non-significant decimal places.
- 2) This batgrbproduct analysis is done using the HEASARC data.
- 3) This batgrbproduct analysis is using the flight position for the mask-weighting calculation.
FLUX-mask-weighted light curve (pcodethresh=0.05; aperture=CALDB:FLUX)
==========================================================================
BAT GROUND-DETECTED GRB DATA PROCESSING REPORT
Process Script Ver: batgrbproduct v2.46
Process Start Time: Thu Dec 17 18:00:09 EST 2015
Host Name: bat1
Current Working Dir: /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger439596
======================================================================
Trigger: 00439596 Segment: 000
BAT Trigger Time: 312890516.8
UTC: 2010-12-01T10:01:50.378 [includes UTCF correction]
Where From?: Ground analysis (best_duration.txt)
NOTE: BAT trigger time for ground-detected burst is the T100 start time.
Analysis Position: [ source = GCN ]
RA: 1.955 Dec: -16.196 [deg; J2000]
Refined Position: [ source = BAT pre-slew image ]
RA: 1.95461435775 Dec: -16.1958009771 [deg; J2000]
{ 00h 07m 49.1s , -16d -11' -44.9" }
+/- 2.17220040342 [arcmin] (estimated 90% radius based on SNR)
SNR: 10.0436053765
Angular difference between the analysis and refined position is 0.025226 arcmin
Partial Coding Fraction: 0.03417969 [ including projection effects ]
Duration
T90: 60.8000000119209 +/- 1.6
Measured from: 3.2
to: 64 [s; relative to TRIGTIME]
T50: 33.6000000238419 +/- 1.6
Measured from: 16
to: 49.6 [s; relative to TRIGTIME]
====== Table of the duration information =============================
Value tstart tstop
T100 67.200 0.000 67.200
T90 60.800 3.200 64.000
T50 33.600 16.000 49.600
Peak 1.000 27.500 28.500
====== Spectral Analysis Summary =====================================
Model : spectral model: simple power-law (PL) and cutoff power-law (CPL)
Ph_index : photon index: E^{Ph_index}
Ph_90err : 90% error of the photon index
Epeak : Epeak in keV
Epeak_90err: 90% error of Epeak
Norm : normalization at 50 keV in both the PL model and CPL model
Nomr_90err : 90% error of the normalization
chi2 : Chi-Squared
dof : degree of freedo
=== Time-averaged spectral analysis ===
(Best model with acceptable fit: N/A)
Model Ph_index Ph_90err_low Ph_90err_hi Epeak Epeak_90err_low Epeak_90err_hi Norm Nomr_90err_low Norm_90err_hi chi2 dof
PL N/A N/A N/A - - - N/A N/A N/A N/A N/A
CPL N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
=== 1-s peak spectral analysis ===
(Best model with acceptable fit: N/A)
Model Ph_index Ph_90err_low Ph_90err_hi Epeak Epeak_90err_low Epeak_90err_hi Norm Nomr_90err_low Norm_90err_hi chi2 dof
PL N/A N/A N/A - - - N/A N/A N/A N/A N/A
CPL N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
=== Fluence/Peak Flux Summary ===
Model Band1 Band2 Band3 Band4 Band5 Total
15-25 25-50 50-100 100-350 15-150 15-350 keV
Fluence PL N/A N/A N/A N/A N/A N/A erg/cm2
Image
15.0-350.0 keV image (Event data with DETECTION mask)
#RAcent DECcent POSerr Theta Phi Peak_Cts SNR Name 1.955 -16.196 0.019 57.909 174.923 2.880 10.044 TRIG_00439596 Image time interval: 23.200 to 33.270 [sec]
Light Curves
Note: The mask-weighted lightcurves have units of either count/det or counts/sec/det, where a det is 0.4 x 0.4 = 0.16 sq cm.
Best duration plot
Full-time range; 1 s binning
Other quick-look light curves:
- 64 ms binning (zoomed)
- 16 ms binning (zoomed)
- 8 ms binning (zoomed)
- 2 ms binning (zoomed)
- SN=5 or 10 s binning (full-time range)
- Raw light curve
Spectra
- 64 ms binning (zoomed)
- 16 ms binning (zoomed)
- 8 ms binning (zoomed)
- 2 ms binning (zoomed)
- SN=5 or 10 s binning (full-time range)
- Raw light curve
Spectra
Notes:
- 1) The fitting includes the systematic errors.
- 2) When the burst includes telescope slew time periods, the fitting uses an average response file made from multiple 5-s response files through out the slew time plus single time preiod for the non-slew times, and weighted by the total counts in the corresponding time period using addrmf. An average response file is needed becuase a spectral fit using the pre-slew DRM will introduce some errors in both a spectral shape and a normalization if the PHA file contains a lot of the slew/post-slew time interval.
- 3) For fits to more complicated models (e.g. a power-law over a cutoff power-law), the BAT team has decided to require a chi-square improvement of more than 6 for each extra dof.
Time averaged spectrum fit using the average DRM
Power-law model
Multiple GTIs in the spectrum tstart tstop Photon index: ( )
Cutoff power-law model
Multiple GTIs in the spectrum tstart tstop Photon index: ( )
1-s peak spectrum fit
Power-law model
Time interval is from 23.200 sec. to 33.270 sec. Photon index: ( )
Cutoff power-law model
Time interval is from 23.200 sec. to 33.270 sec. Photon index: ( )
Time-resolved spectra
Distribution
T90 vs. Hardness ratio plot
T90 = N/A sec. Hardness ratio (energy fluence ratio) = N/A
S(15-50 keV) vs. S(50-150 keV) plot
S(15-50 keV) = N/A S(50-150 keV) = N/A
The dash-dotted line and the dashed line traces the fluences calculated from the Band function with Epeak = 15 and 150 keV, respectively. Both lines assume a canonical values of alpha = -1 and beta = -2.5.
Mask shadow pattern (with DETECTION mask)
IMX = -1.58841107486, IMY = -0.141116550299
Spacecraft aspect plot
Bright source in the event data image
Event data image of 15-350 keV band
Time interval of the image: 23.200000 33.270400 # RAcent DECcent POSerr Theta Phi PeakCts SNR AngSep Name # [deg] [deg] ['] [deg] [deg] ['] 325.9440 38.4069 0.0 34.1 -94.6 -0.0638 -1.0 11.9 Cyg X-2 1.9546 -16.1958 1.2 57.9 174.9 2.8803 10.0 ------ UNKNOWN 16.9550 47.7611 2.6 8.0 16.7 0.1554 4.4 ------ UNKNOWN 358.5062 -16.5582 2.7 58.8 178.7 1.5653 4.2 ------ UNKNOWN
Webpage updated on: Thu Dec 17 18:06:56 EST 2015