Estimated redshift from machine learning (Ukwatta et al. 2016) - may take a few minutes to calcaulte
Image
Pre-slew 15-350 keV image (Event data; bkg subtracted)
Foreground time interval of the image:
Background time interval of the image:
Lightcurves
Notes:
- 1) All plots contain as much data as has been downloaded to date.
- 2) The mask-weighted light curves are using the flight position.
- 3) Multiple plots of different time binning/intervals are shown to cover all scenarios of short/long GRBs, rate/image triggers, and real/false positives.
- 4) For all the mask-weighted lightcurves, the y-axis units are counts/sec/det where a det is 0.4 x 0.4 = 0.16 sq cm.
- 5) The verticle lines correspond to following: green dotted lines are T50 interval, black dotted lines are T90 interval, blue solid line(s) is a spacecraft slew start time, and orange solid line(s) is a spacecraft slew end time.
- 6) Time of each bin is in the middle of the bin.
1 s binning
From T0-310 s to T0+310 s
From T100_start - 20 s to T100_end + 30 s
Full time interval
64 ms binning
Full time interval
From T100_start to T100_end
From T0-5 sec to T0+5 sec
16 ms binning
From T100_start-5 s to T100_start+5 s
Blue+Cyan dotted lines: Time interval of the scaled map
From 0.000000 to 64.000000
8 ms binning
From T100_start-3 s to T100_start+3 s
Blue+Cyan dotted lines: Time interval of the scaled map
From 0.000000 to 64.000000
2 ms binning
From T100_start-1 s to T100_start+1 s
Blue+Cyan dotted lines: Time interval of the scaled map
From 0.000000 to 64.000000
SN=5 or 10 sec. binning (whichever binning is satisfied first)
SN=5 or 10 sec. binning (T < 200 sec)
Spectra
Notes:
- 1) The fitting includes the systematic errors.
- 2) For long bursts, a spectral fit of the pre-slew DRM will introduce some errors in both a spectral shape and a normalization if the PHA file contains a lot of the slew/post-slew time interval.
- 3) For fits to more complicated models (e.g. a power-law over a cutoff power-law), the BAT team has decided to require a chi-square improvement of more than 6 for each extra dof.
- 4) For short bursts (T90<1sec), the specrtum is also fit with Blackbody, OTTB, and Double Blackbody.
Time averaged spectrum fit using the pre-slew DRM
Power-law model
Time interval is from 133.176 sec. to 906.232 sec.
Usage: bat_spec_fit_sys_xspec12.sh (pha file) (response file) (script folder) (folder of taka's xspec lmodel)
This script tries to add the systematic column to the PHA
file before doing the fitting
script folder: /local/data/BATtools/battools/bin/GRB_spec_fit_v2
folder of taka's xspec lmodel: /local/data/bat1/prebascript/xspec_taka_lmodel
Cutoff power-law model
Time interval is from 133.176 sec. to 906.232 sec.
Usage: bat_spec_fit_cutoff_sys_xspec12.sh (pha file) (response file) (script folder) (folder of taka's xspec lmodel)
This script tries to add the systematic column to the PHA
file before doing the fitting
script folder: /local/data/bat2/BATtools/battools/bin/GRB_spec_fit_v2
folder of taka's xspec lmodel: /local/data/bat1/prebascript/xspec_taka_lmodel
Band function
Time interval is from 133.176 sec. to 906.232 sec.
Usage: bat_spec_fit_band_sys.sh (pha file) (response file) (script folder) (folder of taka's xspec lmodel)
This script tries to add the systematic column to the PHA
file before doing the fitting
script folder: /local/data/bat2/BATtools/battools/bin/GRB_spec_fit_v2
folder of taka's xspec lmodel: /local/data/bat1/prebascript/xspec_taka_lmodel
Single BB
Usage: bat_spec_fit_bb_sys.sh (pha file) (response file)
This script tries to add the systematic column to the PHA
file before doing the fitting
Thermal bremsstrahlung (OTTB)
Usage: bat_spec_fit_brems_sys.sh (pha file) (response file)
This script tries to add the systematic column to the PHA
file before doing the fitting
Double BB
Usage: bat_spec_fit_2bb_sys.sh (pha file) (response file)
This script tries to add the systematic column to the PHA
file before doing the fitting
Peak spectrum fit
Power-law model
Time interval is from 738.400 sec. to 739.400 sec.
Usage: bat_spec_fit_sys_xspec12.sh (pha file) (response file) (script folder) (folder of taka's xspec lmodel)
This script tries to add the systematic column to the PHA
file before doing the fitting
script folder: /local/data/BATtools/battools/bin/GRB_spec_fit_v2
folder of taka's xspec lmodel: /local/data/bat1/prebascript/xspec_taka_lmodel
Cutoff power-law model
Time interval is from 738.400 sec. to 739.400 sec.
Usage: bat_spec_fit_cutoff_sys_xspec12.sh (pha file) (response file) (script folder) (folder of taka's xspec lmodel)
This script tries to add the systematic column to the PHA
file before doing the fitting
script folder: /local/data/bat2/BATtools/battools/bin/GRB_spec_fit_v2
folder of taka's xspec lmodel: /local/data/bat1/prebascript/xspec_taka_lmodel
Band function
Time interval is from 738.400 sec. to 739.400 sec.
Usage: bat_spec_fit_band_sys.sh (pha file) (response file) (script folder) (folder of taka's xspec lmodel)
This script tries to add the systematic column to the PHA
file before doing the fitting
script folder: /local/data/bat2/BATtools/battools/bin/GRB_spec_fit_v2
folder of taka's xspec lmodel: /local/data/bat1/prebascript/xspec_taka_lmodel
Single BB
Usage: bat_spec_fit_bb_sys.sh (pha file) (response file)
This script tries to add the systematic column to the PHA
file before doing the fitting
Thermal bremsstrahlung (OTTB)
Usage: bat_spec_fit_brems_sys.sh (pha file) (response file)
This script tries to add the systematic column to the PHA
file before doing the fitting
Double BB
Usage: bat_spec_fit_2bb_sys.sh (pha file) (response file)
This script tries to add the systematic column to the PHA
file before doing the fitting
Pre-slew spectrum (Pre-slew PHA with pre-slew DRM)
Power-law model
Cutoff power-law model
Band function
S(25-50 keV) vs. S(50-100 keV) plot
S(25-50 keV) = --------
S(50-100 keV) = --------
T90 vs. Hardness ratio plot
T90 = 714.227999925613 sec.
Hardness ratio (energy fluence ratio) =
Color vs. Color plot
Count Ratio (25-50 keV) / (15-25 keV) = 0.577777
Count Ratio (50-100 keV) / (15-25 keV) = 0.0148753
Mask shadow pattern
IMX = 0, IMY = 0
TIME vs. PHA plot around the trigger time
Blue+Cyan dotted lines: Time interval of the scaled map
From 0.000000 to 64.000000
TIME vs. DetID plot around the trigger time
Blue+Cyan dotted lines: Time interval of the scaled map
From 0.000000 to 64.000000
100 us light curve (15-350 keV)
Blue+Cyan dotted lines: Time interval of the scaled map
From 0.000000 to 64.000000
Spacecraft aspect plot
Bright source in the pre-burst/pre-slew/post-slew images
Pre-burst image of 15-350 keV band
Time interval of the image:
-77.000000 71.900640
# RAcent DECcent POSerr Theta Phi PeakCts SNR AngSep Name
# [deg] [deg] ['] [deg] [deg] [']
135.3408 -40.4026 0.0 10.8 -62.7 1.2311 7.2 12.5 Vela X-1
170.1782 -60.8316 0.0 39.4 -42.8 0.2995 1.0 13.2 Cen X-3
186.7276 -62.7398 6.6 47.5 -42.7 -0.9690 -1.7 2.7 GX 301-2
91.4411 -62.6850 2.9 34.7 16.5 0.9580 4.0 ------ UNKNOWN
168.1767 -28.1713 3.0 38.0 -96.2 2.0309 3.8 ------ UNKNOWN
172.2297 -29.6355 3.4 40.8 -92.1 2.7166 3.4 ------ UNKNOWN
Pre-slew background subtracted image of 15-350 keV band
Time interval of the image:
Post-slew image of 15-350 keV band
Time interval of the image:
103.200600 963.128800
# RAcent DECcent POSerr Theta Phi PeakCts SNR AngSep Name
# [deg] [deg] ['] [deg] [deg] [']
135.3308 -40.4052 0.0 0.1 -54.2 9.9421 15.2 12.7 Vela X-1
170.3152 -60.6944 5.6 29.6 -34.7 -1.6843 -2.1 4.3 Cen X-3
186.5814 -62.8332 10.3 37.5 -35.8 1.1492 1.1 4.3 GX 301-2
91.0428 -40.2528 2.8 33.3 75.5 5.8737 4.2 ------ UNKNOWN
71.3583 -70.8894 2.7 43.8 25.2 5.4500 4.3 ------ UNKNOWN
122.1995 -76.4431 3.6 36.5 5.1 3.2158 3.2 ------ UNKNOWN
136.4085 -5.0689 3.2 35.3 -177.9 3.6423 3.6 ------ UNKNOWN
169.0581 -72.0084 2.8 35.8 -17.1 3.7598 4.1 ------ UNKNOWN
153.4598 6.2513 2.4 49.5 -155.8 8.9369 4.8 ------ UNKNOWN
169.4260 -26.7223 4.1 31.3 -105.1 3.1679 2.8 ------ UNKNOWN
203.3027 -50.6844 4.3 47.1 -53.4 8.7400 2.7 ------ UNKNOWN
Plot creation:
Sat Oct 27 10:15:23 EDT 2018