#XSPEC version: 12.8.2
#Build Date/Time: Thu Jul  3 19:14:55 2014
#
!XSPEC12> show
#
#XSPEC version: 12.8.2
#
#Sun May 31 07:09:46 2015
# Auto-saving is done after every command.
# Fit statistic in use: Chi-Squared
# Minimization technique: Levenberg-Marquardt
#    Convergence criterion = 0.01
#    Parameter fit deltas: 0.01 * parValue
# Always calculate parameter derivatives using full (slower) numerical differentiation: No
# Querying disabled - will not continue fitting.
# Prefit-renorming enabled.
# Solar abundance table: angr
# Photoionization Cross-Section Table:
#    bcmc:  Balucinska-Church and McCammon, 1998
# Cosmology in use: H0 = 70 q0 = 0 Lambda0 = 0.73
# Model data directory: /software/lheasoft/release/x86_64-unknown-linux-gnu-libc2.12/../spectral/modelData/
# Plot settings:
#   Showing of individual additive components is OFF.
#   Showing of background spectra is OFF.
#   Effective area normalization is OFF.
#   Current unit settings:
#      Energy     = keV
#      Wavelength = angstrom, with Y-Axis displayed per Hz
#   X-Axis data display mode: Channels
#   Spectra plots will be shifted to source frame by redshift value z: 0
#   Device: /null
#   Plotting of line IDs is OFF.
#   Splashpage is ON.
#   xlog for data plots is ON.
#   ylog for data plots is OFF.
#
#   Default plot rebin settings for all plot groups:
#   Min. Signif.   Max. # Bins   Error Type
#        0.00000             1         quad
#
# Responses read: 
#   ../sw00315615000b_preslew.rsp associated with spectrum 1 source 1
#      energies: 204 channels: 80
# Distinct RMF files: 
#     ../sw00315615000b_preslew.rsp
#
#1 file 1 spectrum 
#Spectrum 1  Spectral Data File: ../sw00315615000b_preslew.pha
#Net count rate (cts/s) for Spectrum:1  5.851e-02 +/- 2.892e-03
# Assigned to Data Group 1 and Plot Group 1
#  Noticed Channels:  4-62
#  Telescope: SWIFT Instrument: BAT  Channel Type: PI
#  Exposure Time: 25.19 sec
# Using fit statistic: chi
# Using test statistic: chi
# Using Response (RMF) File            ../sw00315615000b_preslew.rsp for Source 1
#
# Spectral data counts: 1.47368
# Model predicted rate: 5.80820E-02
#
#
#Current model list:
#
#========================================================================
#Model cutep50<1> Source No.: 1   Active/On
#Model Model Component  Parameter  Unit     Value
# par  comp
#   1    1   cutep50    a                   1.64558      +/-  0.398227     
#   2    1   cutep50    b                   29.7805      +/-  11.5764      
#   3    1   cutep50    norm                6.02337E-03  +/-  3.20879E-03  
#________________________________________________________________________
#
#   Using energies from responses.
#
#Fit statistic : Chi-Squared =          51.88 using 59 PHA bins.
#
#Test statistic : Chi-Squared =          51.88 using 59 PHA bins.
# Reduced chi-squared =         0.9264 for     56 degrees of freedom 
# Null hypothesis probability =   6.314736e-01
# Weighting method: standard
#
!XSPEC12> flux 20.0 50.0
# Model Flux   0.26058 photons (1.273e-08 ergs/cm^2/s) range (20.000 - 50.000 keV)
#
!XSPEC12> flux 50.0 150.0
# Model Flux  0.090182 photons (1.1177e-08 ergs/cm^2/s) range (50.000 - 150.00 keV)
#
!XSPEC12> error 1
# Parameter   Confidence Range (2.706)
#Apparent non-monotonicity in statistic space detected.
#Current bracket values 1.80643, 2.27196
#and delta stat 0.177596, 198.65
#but latest trial 2.26308 gives 198.65
#Suggest that you check this result using the steppar command.
#     1     0.945824      2.03919    (-0.699761,0.393609)
#
!XSPEC12> error 2
# Parameter   Confidence Range (2.706)
#
#***XSPEC Error: A fit statistic = NaN was encountered, possibly from model calculation error.  Fit unable to continue
#Error occurred during lower bound error calculation.
#
#Fit statistic : Chi-Squared =          51.88 using 59 PHA bins.
#
#Test statistic : Chi-Squared =          51.88 using 59 PHA bins.
# Reduced chi-squared =         0.9264 for     56 degrees of freedom 
# Null hypothesis probability =   6.314736e-01
# Current data and model not fit yet.
#
#
!XSPEC12> error 3
#A valid fit is first required in order to run error command.
#
#
!XSPEC12> flux 15.0 350.0 err 100 90
#Warning:  Fit is not currently valid, therefore no flux error will be calculated.
# Model Flux   0.49864 photons (3.0267e-08 ergs/cm^2/s) range (15.000 - 350.00 keV)
#
!XSPEC12> flux 15.0 150.0 err 100 90
#Warning:  Fit is not currently valid, therefore no flux error will be calculated.
# Model Flux   0.49077 photons (2.7783e-08 ergs/cm^2/s) range (15.000 - 150.00 keV)
#
!XSPEC12> flux 15.0 25.0 err 100 90
#Warning:  Fit is not currently valid, therefore no flux error will be calculated.
# Model Flux   0.22672 photons (6.9769e-09 ergs/cm^2/s) range (15.000 - 25.000 keV)
#
!XSPEC12> flux 25.0 50.0 err 100 90
#Warning:  Fit is not currently valid, therefore no flux error will be calculated.
# Model Flux   0.17387 photons (9.629e-09 ergs/cm^2/s) range (25.000 - 50.000 keV)
#
!XSPEC12> flux 50.0 100.0 err 100 90
#Warning:  Fit is not currently valid, therefore no flux error will be calculated.
# Model Flux  0.073916 photons (8.0536e-09 ergs/cm^2/s) range (50.000 - 100.00 keV)
#
!XSPEC12> flux 100.0 150.0 err 100 90
#Warning:  Fit is not currently valid, therefore no flux error will be calculated.
# Model Flux  0.016266 photons (3.1232e-09 ergs/cm^2/s) range (100.00 - 150.00 keV)
#
!XSPEC12> flux 100.0 350.0 err 100 90
#Warning:  Fit is not currently valid, therefore no flux error will be calculated.
# Model Flux  0.024132 photons (5.6078e-09 ergs/cm^2/s) range (100.00 - 350.00 keV)
#
!XSPEC12> log none
#