#XSPEC version: 12.9.0c
#Build Date/Time: Wed Jul 29 15:14:04 2015
#
!XSPEC12>show;
#
#XSPEC version: 12.9.0c
#
#Fri Dec 25 02:58:41 2015
# Auto-saving is done after every command.
# Fit statistic in use: Chi-Squared
# Minimization technique: Levenberg-Marquardt
#    Convergence criterion = 0.01
#    Parameter fit deltas: 0.01 * parValue
# Always calculate parameter derivatives using full (slower) numerical differentiation: No
# Querying disabled - will not continue fitting.
# Prefit-renorming enabled.
# Solar abundance table: angr
# Photoionization Cross-Section Table:
#    bcmc:  Balucinska-Church and McCammon, 1998
# Cosmology in use: H0 = 70 q0 = 0 Lambda0 = 0.73
# Model data directory: /software/lheasoft/release/x86_64-unknown-linux-gnu-libc2.12/../spectral/modelData/
# Plot settings:
#   Showing of individual additive components is OFF.
#   Showing of background spectra is OFF.
#   Effective area normalization is OFF.
#   Current unit settings:
#      Energy     = keV
#      Wavelength = angstrom, with Y-Axis displayed per Hz
#   X-Axis data display mode: Energy
#   Spectra plots will be shifted to source frame by redshift value z: 0
#   Device: /null
#   Plotting of line IDs is OFF.
#   Splashpage is ON.
#   xlog for data plots is ON.
#   ylog for data plots is OFF.
#
#   Default plot rebin settings for all plot groups:
#   Min. Signif.   Max. # Bins   Error Type
#        0.00000             1         quad
#
# Responses read: 
#   /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger506074/remake_spec_cflux/spec_20ms_peak/sw00506074000b_20ms_peak.rsp associated with spectrum 1 source 1
#      energies: 204 channels: 10
# Distinct RMF files: 
#     /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger506074/remake_spec_cflux/spec_20ms_peak/sw00506074000b_20ms_peak.rsp
#
#1 file 1 spectrum 
#Spectrum 1  Spectral Data File: /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger506074/remake_spec_cflux/spec_20ms_peak/sw00506074000b_20ms_peak.pha
#Net count rate (cts/s) for Spectrum:1  2.637e-01 +/- 7.922e-02
# Assigned to Data Group 1 and Plot Group 1
#  Noticed Channels:  1-10
#  Telescope: SWIFT Instrument: BAT  Channel Type: PI
#  Exposure Time: 0.02 sec
# Using fit statistic: chi
# Using test statistic: chi
# Using Response (RMF) File            /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger506074/remake_spec_cflux/spec_20ms_peak/sw00506074000b_20ms_peak.rsp for Source 1
#
# Spectral data counts: 0.00527445
# Model predicted rate: 0.211751
#
#
#Current model list:
#
#========================================================================
#Model cpflux<1>*cutep50<2> Source No.: 1   Active/On
#Model Model Component  Parameter  Unit     Value
# par  comp
#   1    1   cpflux     Emin       keV      15.0000      frozen
#   2    1   cpflux     Emax       keV      25.0000      frozen
#   3    1   cpflux     Flux                0.678643     +/-  0.319604     
#   4    2   cutep50    a                   1.82175      +/-  1.91944      
#   5    2   cutep50    b                   9999.36      +/-  4.93438E+07  
#   6    2   cutep50    norm                1.00000      frozen
#________________________________________________________________________
#
#   Using energies from responses.
#
#Fit statistic : Chi-Squared =          13.46 using 10 PHA bins.
#
#Test statistic : Chi-Squared =          13.46 using 10 PHA bins.
# Reduced chi-squared =          1.923 for      7 degrees of freedom 
# Null hypothesis probability =   6.168132e-02
# Weighting method: standard
#
!XSPEC12>error 3;
# Parameter   Confidence Range (2.706)
#***Warning: Zero alpha-matrix diagonal element for parameter 4
#***Warning: Zero alpha-matrix diagonal element for parameter 5
# Parameter 4 is pegged at 1.82175 due to zero or negative pivot element, likely
# caused by the fit being insensitive to the parameter.
# Parameter 5 is pegged at 9999.36 due to zero or negative pivot element, likely
# caused by the fit being insensitive to the parameter.
#
#***XSPEC Error:  No variable parameters for fit 
# Fit error occurred during lower bound error calculation.
#     3            0      1.18974    (-0.677148,0.512593)
#
!XSPEC12>error 4;
# Parameter   Confidence Range (2.706)
#Apparent non-monotonicity in statistic space detected.
#Current bracket values -1.09732, -1.34108
#and delta stat 2.52385, 3.17771
#but latest trial -1.16785 gives 1.74398
#Suggest that you check this result using the steppar command.
#Apparent non-monotonicity in statistic space detected.
#Current bracket values 4.96971, 8.12717
#and delta stat 1.90657, 2.90732
#but latest trial 7.19459 gives 15.3783
#Suggest that you check this result using the steppar command.
#     4      -1.2192      6.54844    (-3.03144,4.73619)
#
!XSPEC12>error 5;
# Parameter   Confidence Range (2.706)
#
#***Warning: Number of trials exceeded before convergence.
#Current trial values 9996.44, -373714
#and delta statistic 0, 2.50284e+18
#
#
#***Warning: Number of trials exceeded before bracketing of delta fit-stat.
#Last attempt: 4.25565e+13, with delta statistic: 0
#
#
#*** Parameter upper bound is INVALID.
#
#     5    0.0100035            0    (-9999.35,-9999.36)
#
!XSPEC12>log none;
#