#XSPEC version: 12.9.0c
#Build Date/Time: Wed Jul 29 15:14:04 2015
#
!XSPEC12> show
#
#XSPEC version: 12.9.0c
#
#Thu Dec 24 16:24:19 2015
# Auto-saving is done after every command.
# Fit statistic in use: Chi-Squared
# Minimization technique: Levenberg-Marquardt
#    Convergence criterion = 0.01
#    Parameter fit deltas: 0.01 * parValue
# Always calculate parameter derivatives using full (slower) numerical differentiation: No
# Querying disabled - will not continue fitting.
# Prefit-renorming enabled.
# Solar abundance table: angr
# Photoionization Cross-Section Table:
#    bcmc:  Balucinska-Church and McCammon, 1998
# Cosmology in use: H0 = 70 q0 = 0 Lambda0 = 0.73
# Model data directory: /software/lheasoft/release/x86_64-unknown-linux-gnu-libc2.12/../spectral/modelData/
# Plot settings:
#   Showing of individual additive components is OFF.
#   Showing of background spectra is OFF.
#   Effective area normalization is OFF.
#   Current unit settings:
#      Energy     = keV
#      Wavelength = angstrom, with Y-Axis displayed per Hz
#   X-Axis data display mode: Channels
#   Spectra plots will be shifted to source frame by redshift value z: 0
#   Device: /null
#   Plotting of line IDs is OFF.
#   Splashpage is ON.
#   xlog for data plots is ON.
#   ylog for data plots is OFF.
#
#   Default plot rebin settings for all plot groups:
#   Min. Signif.   Max. # Bins   Error Type
#        0.00000             1         quad
#
# Responses read: 
#   /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger530581/remake_spec_cflux/spec_T100/sw00530581000b_avg.rsp associated with spectrum 1 source 1
#      energies: 204 channels: 80
# Distinct RMF files: 
#     /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger530581/remake_spec_cflux/spec_T100/sw00530581000b_avg.rsp
#
#1 file 1 spectrum 
#Spectrum 1  Spectral Data File: /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger530581/remake_spec_cflux/spec_T100/sw00530581000b_avg.pha
#Net count rate (cts/s) for Spectrum:1  4.108e-02 +/- 1.816e-03
# Assigned to Data Group 1 and Plot Group 1
#  Noticed Channels:  4-62
#  Telescope: SWIFT Instrument: BAT  Channel Type: PI
#  Exposure Time: 36.38 sec
# Using fit statistic: chi
# Using test statistic: chi
# Using Response (RMF) File            /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger530581/remake_spec_cflux/spec_T100/sw00530581000b_avg.rsp for Source 1
#
# Spectral data counts: 1.49454
# Model predicted rate: 4.09568E-02
#
#
#Current model list:
#
#========================================================================
#Model cutep50<1> Source No.: 1   Active/On
#Model Model Component  Parameter  Unit     Value
# par  comp
#   1    1   cutep50    a                   1.95818      +/-  0.289894     
#   2    1   cutep50    b                   9999.36      +/-  2.96469E+07  
#   3    1   cutep50    norm                2.24711E-03  +/-  7.99852E-04  
#________________________________________________________________________
#
#   Using energies from responses.
#
#Fit statistic : Chi-Squared =          51.54 using 59 PHA bins.
#
#Test statistic : Chi-Squared =          51.54 using 59 PHA bins.
# Reduced chi-squared =         0.9203 for     56 degrees of freedom 
# Null hypothesis probability =   6.442951e-01
# Weighting method: standard
#
!XSPEC12> error 1
# Parameter   Confidence Range (2.706)
#     1      1.82273      2.09481    (-0.135131,0.136956)
#
!XSPEC12> error 2
# Parameter   Confidence Range (2.706)
#
#***XSPEC Error: A fit statistic = NaN was encountered, possibly from model calculation error.  Fit unable to continue
#Error occurred during lower bound error calculation.
#
#Fit statistic : Chi-Squared =          51.54 using 59 PHA bins.
#
#Test statistic : Chi-Squared =          51.54 using 59 PHA bins.
# Reduced chi-squared =         0.9203 for     56 degrees of freedom 
# Null hypothesis probability =   6.442980e-01
# Current data and model not fit yet.
#
#
!XSPEC12> error 3
#A valid fit is first required in order to run error command.
#
#
!XSPEC12> log none
#