#XSPEC version: 12.9.0c
#Build Date/Time: Wed Jul 29 15:14:04 2015
#
!XSPEC12>show;
#
#XSPEC version: 12.9.0c
#
#Mon Nov 16 15:49:51 2015
# Auto-saving is done after every command.
# Fit statistic in use: Chi-Squared
# Minimization technique: Levenberg-Marquardt
#    Convergence criterion = 0.01
#    Parameter fit deltas: 0.01 * parValue
# Always calculate parameter derivatives using full (slower) numerical differentiation: No
# Querying disabled - will not continue fitting.
# Prefit-renorming enabled.
# Solar abundance table: angr
# Photoionization Cross-Section Table:
#    bcmc:  Balucinska-Church and McCammon, 1998
# Cosmology in use: H0 = 70 q0 = 0 Lambda0 = 0.73
# Model data directory: /software/lheasoft/release/x86_64-unknown-linux-gnu-libc2.12/../spectral/modelData/
# Plot settings:
#   Showing of individual additive components is OFF.
#   Showing of background spectra is OFF.
#   Effective area normalization is OFF.
#   Current unit settings:
#      Energy     = keV
#      Wavelength = angstrom, with Y-Axis displayed per Hz
#   X-Axis data display mode: Energy
#   Spectra plots will be shifted to source frame by redshift value z: 0
#   Device: /null
#   Plotting of line IDs is OFF.
#   Splashpage is ON.
#   xlog for data plots is ON.
#   ylog for data plots is OFF.
#
#   Default plot rebin settings for all plot groups:
#   Min. Signif.   Max. # Bins   Error Type
#        0.00000             1         quad
#
# Responses read: 
#   ../sw00660671000b_preslew.rsp associated with spectrum 1 source 1
#      energies: 204 channels: 80
# Distinct RMF files: 
#     ../sw00660671000b_preslew.rsp
#
#1 file 1 spectrum 
#Spectrum 1  Spectral Data File: ../sw00660671000b_preslew.pha
#Net count rate (cts/s) for Spectrum:1  5.613e-01 +/- 1.017e-02
# Assigned to Data Group 1 and Plot Group 1
#  Noticed Channels:  4-62
#  Telescope: SWIFT Instrument: BAT  Channel Type: PI
#  Exposure Time: 38.45 sec
# Using fit statistic: chi
# Using test statistic: chi
# Using Response (RMF) File            ../sw00660671000b_preslew.rsp for Source 1
#
# Spectral data counts: 21.5803
# Model predicted rate: 0.562690
#
#
#Current model list:
#
#========================================================================
#Model pphcut<1> Source No.: 1   Active/On
#Model Model Component  Parameter  Unit     Value
# par  comp
#   1    1   pphcut     PhoIndex            1.32918      +/-  0.108746     
#   2    1   pphcut     HighECut   keV      9999.36      +/-  3.49595E+05  
#   3    1   pphcut     eMin       keV      25.0000      frozen
#   4    1   pphcut     eMax       keV      50.0000      frozen
#   5    1   pphcut     norm                1.61079      +/-  3.22680E-02  
#________________________________________________________________________
#
#   Using energies from responses.
#
#Fit statistic : Chi-Squared =          38.04 using 59 PHA bins.
#
#Test statistic : Chi-Squared =          38.04 using 59 PHA bins.
# Reduced chi-squared =         0.6793 for     56 degrees of freedom 
# Null hypothesis probability =   9.683956e-01
# Weighting method: standard
#
!XSPEC12>error 5;
# Parameter   Confidence Range (2.706)
#     5      1.55825      1.65989    (-0.0524825,0.0491571)
#
!XSPEC12>error 1;
# Parameter   Confidence Range (2.706)
#Apparent non-monotonicity in statistic space detected.
#Current bracket values 1.32911, 1.15022
#and delta stat 0, 2.96114
#but latest trial 1.1581 gives 35.1389
#Suggest that you check this result using the steppar command.
#     1      1.23966      1.37498    (-0.0893793,0.0459414)
#
!XSPEC12>error 2;
# Parameter   Confidence Range (2.706)
#
#***XSPEC Error: Unable to fit when starting with fit statistic = NaN
#Error occurred during lower bound error calculation.
#
#Fit statistic : Chi-Squared =          38.04 using 59 PHA bins.
#
#Test statistic : Chi-Squared =          38.04 using 59 PHA bins.
# Reduced chi-squared =         0.6793 for     56 degrees of freedom 
# Null hypothesis probability =   9.683984e-01
# Current data and model not fit yet.
#
!XSPEC12> @/local/data/raid2/battools/bin/GRB_spec_fit_v2/bat_pphcut_part5_50_100kev_fit.xcm
#
!XSPEC12>log none;
#