#XSPEC version: 12.12.1
#Build Date/Time: Tue Mar 15 11:46:30 2022
#
!XSPEC12> show
#
#XSPEC version: 12.12.1
#
#Fri Nov 11 21:21:10 2022
# Auto-saving is done after every command.
# Minimization technique: Levenberg-Marquardt
#    Convergence criterion = 0.01
#    Parameter fit deltas: 0.01 * parValue
#Using chain rule to calculate statistic derivatives (faster method).
# Querying disabled - will not continue fitting.
# Prefit-renorming enabled.
# Solar abundance table: angr
# Photoionization Cross-Section Table:
#    bcmc:  Balucinska-Church and McCammon, 1998
# Cosmology in use: H0 = 70 q0 = 0 Lambda0 = 0.73
# Model data directory: /software/lheasoft/release/x86_64-pc-linux-gnu-libc2.12/../spectral/manager/../modelData/
# Plot settings:
#   Showing of individual additive components is OFF.
#   Showing of background spectra is OFF.
#   Effective area normalization is OFF.
#   Current unit settings:
#      Energy     = keV
#      Wavelength = angstrom, with Y-Axis displayed per Hz
#   X-Axis data display mode: Channels
#   Spectra plots will be shifted to source frame by redshift value z: 0
#   Device: /null
#   Plotting of line IDs is OFF.
#   Splashpage is ON.
#   xlog for data plots is ON.
#   ylog for data plots is OFF.
#
#   Default plot rebin settings for all plot groups:
#   Min. Signif.   Max. # Bins   Error Type
#        0.00000             1         quad
#
# Responses read:  none 
#
#1 file 1 spectrum 
#Spectrum 1  Spectral Data File: /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger1058804/01058804000-results/pha/sw01058804000b_peak.pha
#Net count rate (cts/s) for Spectrum:1  6.533e-01 +/- 1.391e-01
# Assigned to Data Group 1 and Plot Group 1
#  Noticed Channels:  1-80
#  Telescope: SWIFT Instrument: BAT  Channel Type: PI
#  Exposure Time: 1 sec
# Using fit statistic: chi
# No response loaded.
#
# Spectral data counts: 0.653294
# Model predicted rate: 0.0
#
#
#Current model list: none 
#   Using energies from responses.
#No active models
#
#Bayes is off
#
#
!XSPEC12> flux 15.0 25.0 err 500 90
#Warning: Either variance is not available through 
#         valid fit or chains, or no models are currently 
#         active. flux error will not be calculated.
#
#***XSPEC Error: No models defined for flux calculation
#
!XSPEC12> flux 25.0 50.0 err 500 90
#Warning: Either variance is not available through 
#         valid fit or chains, or no models are currently 
#         active. flux error will not be calculated.
#
#***XSPEC Error: No models defined for flux calculation
#
!XSPEC12> flux 50.0 150.0 err 500 90
#Warning: Either variance is not available through 
#         valid fit or chains, or no models are currently 
#         active. flux error will not be calculated.
#
#***XSPEC Error: No models defined for flux calculation
#
!XSPEC12> flux 15.0 150.0 err 500 90
#Warning: Either variance is not available through 
#         valid fit or chains, or no models are currently 
#         active. flux error will not be calculated.
#
#***XSPEC Error: No models defined for flux calculation
#
!XSPEC12> error 1
#***Error:  Unable to locate parameter 1
#If parameter belongs to a named model, make sure model name is specified.
#
!XSPEC12> error 2
#***Error:  Unable to locate parameter 2
#If parameter belongs to a named model, make sure model name is specified.
#
!XSPEC12> error 3
#***Error:  Unable to locate parameter 3
#If parameter belongs to a named model, make sure model name is specified.
#
!XSPEC12> error 4
#***Error:  Unable to locate parameter 4
#If parameter belongs to a named model, make sure model name is specified.
#
!XSPEC12> log none
#