#XSPEC version: 12.13.1
#Build Date/Time: Thu Jul 20 16:52:54 2023
#
!XSPEC12>show
#
#XSPEC version: 12.13.1
#
#Sat Sep 30 00:49:07 2023
# Auto-saving is done after every command.
# Fit statistic in use: Chi-Squared
# Minimization technique: Levenberg-Marquardt
#    Convergence criterion = 0.01
#    Parameter fit deltas: 0.01 * parValue
#Using chain rule to calculate statistic derivatives (faster method).
# Querying disabled - will not continue fitting.
# Prefit-renorming enabled.
# Solar abundance table: angr
# Photoionization Cross-Section Table:
#    bcmc:  Balucinska-Church and McCammon, 1998
# Cosmology in use: H0 = 70 q0 = 0 Lambda0 = 0.73
# Model data directory: /software/lheasoft/release/x86_64-pc-linux-gnu-libc2.12/../spectral/manager/../modelData/
# Plot settings:
#   Showing of individual additive components is OFF.
#   Showing of background spectra is OFF.
#   Effective area normalization is OFF.
#   Current unit settings:
#      Energy     = keV
#      Wavelength = angstrom, with Y-Axis displayed per Hz
#   X-Axis data display mode: Energy
#   Spectra plots will be shifted to source frame by redshift value z: 0
#   Device: /null
#   Plotting of line IDs is OFF.
#   Splashpage is ON.
#   xlog for data plots is ON.
#   ylog for data plots is OFF.
#
#   Default plot rebin settings for all plot groups:
#   Min. Signif.   Max. # Bins   Error Type
#        0.00000             1         quad
#
# Responses read: 
#   ../sw01173731000b_preslew.rsp associated with spectrum 1 source 1
#      energies: 204 channels: 80
# Distinct RMF files: 
#     /local/data/bat1/alien/Swift_3rdBATcatalog/event/batevent_reproc/trigger1173731/01173731000-results/pha/preslew_pha/../sw01173731000b_preslew.rsp
#
#1 file 1 spectrum 
#Spectrum 1  Spectral Data File: ../sw01173731000b_preslew.pha
#Net count rate (cts/s) for Spectrum:1  9.099e-02 +/- 9.528e-03
# Assigned to Data Group 1 and Plot Group 1
#  Noticed Channels:  4-62
#  Telescope: SWIFT Instrument: BAT  Channel Type: PI
#  Exposure Time: 17.23 sec
# Using fit statistic: chi
# Using Response (RMF) File            ../sw01173731000b_preslew.rsp for Source 1
#
# Spectral data counts: 1.568
# Model predicted rate: 9.03818E-02
#
#
#Current model list:
#
#========================================================================
#Model pphcut<1> Source No.: 1   Active/On
#Model Model Component  Parameter  Unit     Value
# par  comp
#   1    1   pphcut     PhoIndex            1.17056      +/-  0.679821     
#   2    1   pphcut     HighECut   keV      9974.34      +/-  1.75198E+06  
#   3    1   pphcut     eMin       keV      25.0000      frozen
#   4    1   pphcut     eMax       keV      50.0000      frozen
#   5    1   pphcut     norm                0.255579     +/-  3.48422E-02  
#________________________________________________________________________
#
#   Using energies from responses.
#
#Fit statistic  : Chi-Squared                   34.37     using 59 bins.
#
#Test statistic : Chi-Squared                   34.37     using 59 bins.
# Null hypothesis probability of 9.90e-01 with 56 degrees of freedom
#
#Bayes is off
#
#
!XSPEC12>error 5
# Parameter   Confidence Range (2.706)
#Apparent non-monotonicity in statistic space detected.
#Current bracket values 0.199464, 0.199224
#and delta stat 2.68478, 2.84059
#but latest trial 0.199416 gives 3.68631
#Suggest that you check this result using the steppar command.
#     5     0.199344     0.314164    (-0.0562353,0.0585847)
#
!XSPEC12>error 1
# Parameter   Confidence Range (2.706)
#     1    -0.379469      1.46931    (-1.55003,0.298755)
#
!XSPEC12>error 2
# Parameter   Confidence Range (2.706)
#
#***XSPEC Error: Unable to fit when starting with fit statistic = NaN
#Error occurred during lower bound error calculation.
#
#Fit statistic  : Chi-Squared                   34.37     using 59 bins.
#
#Test statistic : Chi-Squared                   34.37     using 59 bins.
# Null hypothesis probability of 9.90e-01 with 56 degrees of freedom
# Current data and model not fit yet.
#
!XSPEC12> @/local/data/bat2/BATtools/battools/bin/GRB_spec_fit_v2/bat_pphcut_part5_50_100kev_fit.xcm
#
!XSPEC12>log none
#